RACH-Series, Aluminium Hollow Plunger Cylinders
- Hollow plunger design allows for both pull and push forces
- Composite bearings increase cylinder life and sideload resistance
- Hard-Coat finish on all surfaces resists damage and extends cylinder life
- Floating center tube increases seal and product life
- Handles standard on all models
- Steel base plate and saddle for protection against load-induced damage
- Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- High strength return spring for rapid cylinder retraction
- CR-400 coupler and dust cap included on all models
- All cylinders meet ASME B-30.1 and ISO 10100 standards.
| Cylinder Capacity @ 700 bar ton (kN) | Stroke (mm) | Model Number | Cylinder Effective Area (cm 2 ) | Oil Capacity (cm 3 ) | Collapsed Height (mm) |
|---|---|---|---|---|---|
| 20 (229) | 50 | RACH-202 | 32,7 | 164 | 188 |
| 100 | RACH-204 | 32,7 | 327 | 251 | |
| 150 | RACH-206 | 32,7 | 491 | 315 | |
| 200 | RACH-208 | 32,7 | 654 | 378 | |
| 250 | RACH-2010 | 32,7 | 818 | 442 | |
| 30 (358) | 50 | RACH-302 | 51,1 | 256 | 208 |
| 100 | RACH-304 | 51,1 | 511 | 267 | |
| 150 | RACH-306 | 51,1 | 766 | 333 | |
| 200 | RACH-308 | 51,1 | 1022 | 395 | |
| 250 | RACH-3010 | 51,1 | 1277 | 458 | |
| 60(596) | 50 | RACH-602 | 84,7 | 423 | 251 |
| 100 | RACH-604 | 84,7 | 847 | 315 | |
| 150 | RACH-606 | 84,7 | 1270 | 380 | |
| 200 | RACH-608 | 84,7 | 1694 | 445 | |
| 250 | RACH-6010 | 84,7 | 2117 | 510 | |
| 100(1157) | 50 | RACH-1002 | 164,6 | 823 | 258 |
| 100 | RACH-1004 | 164,6 | 1646 | 325 | |
| 150 | RACH-1006 | 164,6 | 2487 | 391 | |
| 200 | RACH-1008 | 164,6 | 3291 | 459 | |
| 250 | RACH-10010 | 164,6 | 4114 | 527 | |
| 150 (1588) | 50 | RACH-1502 | 225,8 | 1129 | 280 |
| 100 | RACH-1504 | 225,8 | 2258 | 360 | |
| 150 | RACH-1506 | 225,8 | 3387 | 430 | |
| 200 | RACH-1508 | 225,8 | 4517 | 500 | |
| 250 | RACH-15010 | 225,8 | 5646 | 570 |
